Behavior of RC Beam-Column Joints Strengthened with Modified Reinforcement Techniques

Scientific paper - Original scientific paper

• Author: Aditya Kumar Tiwary
• Author: Sandeep Singh
• Author: Jasgurpreet Singh Chohan
• Author: Raman Kumar
• Author: Shubham Sharma Sharma
• Author: Somnath Chattopadhyaya
• Author: Farid Abed
• Author: Mislav Stepinac
• Author's institution: University of Zagreb; Faculty of Civil Engineering
• Scientific / art field, discipline and subdiscipline: TECHNICAL SCIENCES; Civil Engineering

Abstract (english)

Using a significant number of transverse hoops in the joint’s core is one recognized way for achieving the requirements of strength, stiffness, and ductility under dynamic loading in a column joint. The shear capacity of a joint is influenced by the concrete’s compressive strength, the anchoring of longitudinal beam reinforcement, the number of stirrups in the joint, and the junction’s aspect ratio. Seismic motion on the beam may produce shear capacity and bond breaking in the joint, causing the joint to fracture. Furthermore, due to inadequate joint design and details, the entire structure is jeopardized. In this study, the specimens were divided into two groups for corner and interior beam–column joints based on the joint reinforcement detailing. The controlled specimen has joint detailing as per IS 456:2000, and the strengthened specimen has additional diagonal cross bars (modified reinforcement technique) at the joints detailed as per IS 456:200. The displacement time history curve, load-displacement response curves, load-displacement hysteretic curve, and load cycle vs. shear stress were used to compare the results of the controlled and strengthened specimens. The findings show that adding diagonal cross bars (modified reinforcing techniques) to beam–column joints exposed to cyclic loads enhances their performance. The inclusion of a diagonal cross bar increased the stiffness of the joint by giving an additional mechanism for shear transfer and ductility, as well as greater strength with minimum cracks.

• Keywords (english): beam–column joints; shear capacity; cyclic loading; joint’s numerical modeling; interior joint; corner joint; modified reinforcement technique (MRT)
• Language: english
• Publication type: Scientific paper - Original scientific paper
• Publication status: Published
• Peer review: Peer review - international
• Publication version: Published version
• Journal title: Sustainability
• Numbering: vol. 14(3), pp. 1-19
• e-ISSN: 2071-1050
• URN:NBN: urn:nbn:hr:237:534423
• Publication: 2022
• Type of resource: Text
• Access conditions: Open access
• Created on: 2024-09-04 20:54:44