prikaz prve stranice dokumenta Comparison of Infrared Thermography and Heat Flux Method for Dynamic Thermal Transmittance Determination
  Download
PDF 10.49 MB
Scientific paper - Original scientific paper
Comparison of Infrared Thermography and Heat Flux Method for Dynamic Thermal Transmittance Determination
Buildings, 9 (2019); 1-23. urn:nbn:hr:237:227754
Gaši, Mergim; Milovanović, Bojan; Gumbarević, Sanjin

Cite this document

Gaši, M., Milovanović, B. & Gumbarević, S. (2019). Comparison of Infrared Thermography and Heat Flux Method for Dynamic Thermal Transmittance Determination. Buildings, 9., 1-23. Retrieved from https://urn.nsk.hr/urn:nbn:hr:237:227754

Gaši, Mergim, et al. "Comparison of Infrared Thermography and Heat Flux Method for Dynamic Thermal Transmittance Determination." Buildings, vol. 9, 2019, pp. 1-23. https://urn.nsk.hr/urn:nbn:hr:237:227754

Gaši, Mergim, Bojan Milovanović and Sanjin Gumbarević. "Comparison of Infrared Thermography and Heat Flux Method for Dynamic Thermal Transmittance Determination." Buildings 9 (2019): 1-23. https://urn.nsk.hr/urn:nbn:hr:237:227754

Gaši, M., Milovanović, B. and Gumbarević, S. (2019) 'Comparison of Infrared Thermography and Heat Flux Method for Dynamic Thermal Transmittance Determination', Buildings, 9, pp. 1-23. Available at: https://urn.nsk.hr/urn:nbn:hr:237:227754 (Accessed 26 December 2024)

Gaši M, Milovanović B, Gumbarević S. Comparison of Infrared Thermography and Heat Flux Method for Dynamic Thermal Transmittance Determination. Buildings [Internet]. 2019 [cited 2024 December 26];9:1-23. Available at: https://urn.nsk.hr/urn:nbn:hr:237:227754

M. Gaši, B. Milovanović and S. Gumbarević, "Comparison of Infrared Thermography and Heat Flux Method for Dynamic Thermal Transmittance Determination", Buildings, vol. 9, pp. 1-23, 2019. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:237:227754. [Accessed: 26 December 2024]

Please login to the repository to save this object to your list.
Metadata
Title (english)Comparison of Infrared Thermography and Heat Flux Method for Dynamic Thermal Transmittance Determination
AuthorMergim Gaši
AuthorBojan Milovanović
AuthorSanjin Gumbarević
Author's institutionUniversity of Zagreb
Faculty of Civil Engineering
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Abstract (english)
This paper proposes an alternative experimental procedure that uses infrared thermography (IRT) for measuring the surface temperature of building elements, through which it is possible to approximate the thermal transmittance or the U- value. The literature review showed that all authors used similar procedures that require semi- stationary heat transfer conditions, which, in most cases, could not be achieved. The dynamic and the average methods that are given in ISO 9869 were also used with the IRT and the heat flux method (HFM). The dynamic method (DYNM) shows a higher level of accuracy compared to the average method (AVGM). Since the algorithm of the DYNM is more complicated than that of the AVGM, Microsoft Excel VBA was used to implement the algorithm of the DYNM. Using the procedure given in this paper, the U-value could be approximated within 0–30% of the design U-value. The use of IRT, in combination with the DYNM, could be used in-situ since the DYNM does not require stable boundary conditions. Furthermore, the procedure given in this paper could be used for relatively fast and inexpensive U-value approximation without the use of expensive equipment (e.g., heat flux sensors).
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleBuildings
Numberingvol. 9, pp. 1-23
e-ISSN2075-5309
URN:NBNurn:nbn:hr:237:227754
Publication2019
Document URLhttps://doi.org/10.3390/buildings9050132
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-09-04 06:37:48