prikaz prve stranice dokumenta Optimisation of Aluminium Halls in the Republic of Croatia-Numerical Study
  Preuzmi
PDF 3.93 MB
Znanstveni rad - Izvorni znanstveni rad
Optimisation of Aluminium Halls in the Republic of Croatia-Numerical Study
Tehnički vjesnik = Technical gazette, 29(5) (2022); 1454-1463. urn:nbn:hr:237:075222
Skejić, Davor; Valčić, Anđelo; Čudina, Ivan

Citirajte ovaj rad

Skejić, D., Valčić, A. i Čudina, I. (2022). Optimisation of Aluminium Halls in the Republic of Croatia-Numerical Study. Tehnički vjesnik = Technical gazette, 29(5)., 1454-1463. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:237:075222

Skejić, Davor, et al. "Optimisation of Aluminium Halls in the Republic of Croatia-Numerical Study." Tehnički vjesnik = Technical gazette, vol. 29(5), 2022, str. 1454-1463. https://urn.nsk.hr/urn:nbn:hr:237:075222

Skejić, Davor, Anđelo Valčić i Ivan Čudina. "Optimisation of Aluminium Halls in the Republic of Croatia-Numerical Study." Tehnički vjesnik = Technical gazette 29(5) (2022): 1454-1463. https://urn.nsk.hr/urn:nbn:hr:237:075222

Skejić, D., Valčić, A. i Čudina, I. (2022) 'Optimisation of Aluminium Halls in the Republic of Croatia-Numerical Study', Tehnički vjesnik = Technical gazette, 29(5), str. 1454-1463. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:237:075222 (Datum pristupa: 01.10.2024.)

Skejić D, Valčić A, Čudina I. Optimisation of Aluminium Halls in the Republic of Croatia-Numerical Study. Tehnički vjesnik = Technical gazette [Internet]. 2022. [pristupljeno 01.10.2024.];29(5):1454-1463. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:237:075222

D. Skejić, A. Valčić i I. Čudina, "Optimisation of Aluminium Halls in the Republic of Croatia-Numerical Study", Tehnički vjesnik = Technical gazette, vol. 29(5), str. 1454-1463, 2022. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:237:075222. [Citirano: 01.10.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:237:075222
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Optimisation of Aluminium Halls in the Republic of Croatia-Numerical Study
AutorDavor Skejić
AutorAnđelo Valčić
AutorIvan Čudina
Autorova ustanovaSveučilište u Zagrebu
Građevinski fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Građevinarstvo
Sažetak (engleski)
In this paper, numerical optimisation of aluminium prefabricated halls is made considering different wind and snow load zones in the Republic of Croatia. The main structural system is a portal frame with a tension-tie element. Standard frame spans of 10 to 20 meters and heights of 3 to 6 meters were analysed. Beams and columns were made of EN AW-6005 A aluminium alloy using extruded rectangular profiles 230 × 90 × 3 mm with slots. In the joint zones, aluminium profiles were connected using 180 x 80 mm tubular steel knee inserts with thicknesses varying from 3 to 6 mm made of structural steel S 235 or S 355. Parametric analyses were performed to find the optimal geometry of steel inserts in terms of uniform utilisation of aluminium and steel cross- sections for all considered frame geometries and load zones. Also, the material consumption is discussed. Based on the performed analyses, the preliminary geometry of the frame with their maximum allowable distances is proposed. These results can be used for cost estimations of the optimal disposition of aluminium halls in the Republic of Croatia.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaTehnički vjesnik = Technical gazette
Brojčani podacivol. 29(5), str. 1454-1463
e-ISSN1848-6339
URN:NBNurn:nbn:hr:237:075222
Datum objave publikacije2022
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-09-05 04:46:56