prikaz prve stranice dokumenta Parametric Numerical Study of Welded Aluminium Beam-to-Column Joints
  Preuzmi
PDF 7.53 MB
Znanstveni rad - Izvorni znanstveni rad
Parametric Numerical Study of Welded Aluminium Beam-to-Column Joints
Buildings, 13(3) (2023); 718-739. urn:nbn:hr:237:848121
Skejić, Davor; Žuvelek, Vlaho; Valčić, Anđelo

Citirajte ovaj rad

Skejić, D., Žuvelek, V. i Valčić, A. (2023). Parametric Numerical Study of Welded Aluminium Beam-to-Column Joints. Buildings, 13(3)., 718-739. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:237:848121

Skejić, Davor, et al. "Parametric Numerical Study of Welded Aluminium Beam-to-Column Joints." Buildings, vol. 13(3), 2023, str. 718-739. https://urn.nsk.hr/urn:nbn:hr:237:848121

Skejić, Davor, Vlaho Žuvelek i Anđelo Valčić. "Parametric Numerical Study of Welded Aluminium Beam-to-Column Joints." Buildings 13(3) (2023): 718-739. https://urn.nsk.hr/urn:nbn:hr:237:848121

Skejić, D., Žuvelek, V. i Valčić, A. (2023) 'Parametric Numerical Study of Welded Aluminium Beam-to-Column Joints', Buildings, 13(3), str. 718-739. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:237:848121 (Datum pristupa: 29.12.2024.)

Skejić D, Žuvelek V, Valčić A. Parametric Numerical Study of Welded Aluminium Beam-to-Column Joints. Buildings [Internet]. 2023. [pristupljeno 29.12.2024.];13(3):718-739. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:237:848121

D. Skejić, V. Žuvelek i A. Valčić, "Parametric Numerical Study of Welded Aluminium Beam-to-Column Joints", Buildings, vol. 13(3), str. 718-739, 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:237:848121. [Citirano: 29.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:237:848121
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Parametric Numerical Study of Welded Aluminium Beam-to-Column Joints
AutorDavor Skejić
AutorVlaho Žuvelek
AutorAnđelo Valčić
Autorova ustanovaSveučilište u Zagrebu
Građevinski fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Građevinarstvo
Sažetak (engleski)
Beam-to-column joints are one of the most common types of joints in metal structures. In the design of load-bearing aluminium structures, welding, as a joining method, is often avoided because of localised degradation of mechanical properties in the heat-affected zone (HAZ). However, recent experimental studies on the extent and strength of the HAZ show a significant difference compared to very conservative design rules when modern welding techniques are used. Therefore, the numerical study conducted in this paper addresses the influence of HAZ on the mechanical behaviour of the welded aluminium beam-to-column joint. Parametric numerical analyses were performed varying the aluminium alloys, the reduced mechanical properties of the HAZ, and different definitions of the HAZ extent. The obtained results show that the highest stress concentration occurs at the connection between the top beam flange and the column flange, resulting in plastic softening in this region. Different joint capacities were observed by varying the mechanical properties of the HAZ. A detailed overview of numerical models as well as the obtained moment– rotation curves show that the behaviour of some models is not as conservative as assumed in the design standards considered.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaBuildings
Brojčani podacivol. 13(3), str. 718-739
e-ISSN2075-5309
URN:NBNurn:nbn:hr:237:848121
Datum objave publikacije2023
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-09-05 06:37:54