Behavior of RC Beam-Column Joints Strengthened with Modified Reinforcement Techniques

Znanstveni rad - Izvorni znanstveni rad

• Autor: Aditya Kumar Tiwary
• Autor: Sandeep Singh
• Autor: Jasgurpreet Singh Chohan
• Autor: Raman Kumar
• Autor: Shubham Sharma Sharma
• Autor: Somnath Chattopadhyaya
• Autor: Farid Abed
• Autor: Mislav Stepinac
• Autorova ustanova: Sveučilište u Zagrebu; Građevinski fakultet
• Znanstveno / umjetničko područje, polje i grana: TEHNIČKE ZNANOSTI; Građevinarstvo

Sažetak (engleski)

Using a significant number of transverse hoops in the joint’s core is one recognized way for achieving the requirements of strength, stiffness, and ductility under dynamic loading in a column joint. The shear capacity of a joint is influenced by the concrete’s compressive strength, the anchoring of longitudinal beam reinforcement, the number of stirrups in the joint, and the junction’s aspect ratio. Seismic motion on the beam may produce shear capacity and bond breaking in the joint, causing the joint to fracture. Furthermore, due to inadequate joint design and details, the entire structure is jeopardized. In this study, the specimens were divided into two groups for corner and interior beam–column joints based on the joint reinforcement detailing. The controlled specimen has joint detailing as per IS 456:2000, and the strengthened specimen has additional diagonal cross bars (modified reinforcement technique) at the joints detailed as per IS 456:200. The displacement time history curve, load-displacement response curves, load-displacement hysteretic curve, and load cycle vs. shear stress were used to compare the results of the controlled and strengthened specimens. The findings show that adding diagonal cross bars (modified reinforcing techniques) to beam–column joints exposed to cyclic loads enhances their performance. The inclusion of a diagonal cross bar increased the stiffness of the joint by giving an additional mechanism for shear transfer and ductility, as well as greater strength with minimum cracks.

• Ključne riječi (engleski): beam–column joints; shear capacity; cyclic loading; joint’s numerical modeling; interior joint; corner joint; modified reinforcement technique (MRT)
• Jezik: engleski
• Vrsta publikacije: Znanstveni rad - Izvorni znanstveni rad
• Status objave: Objavljen
• Vrsta recenzije: Recenziran - međunarodna recenzija
• Verzija publikacije: Objavljena verzija rada (izdavačev PDF)
• Naslov časopisa: Sustainability
• Brojčani podaci: vol. 14(3), str. 1-19
• e-ISSN: 2071-1050
• URN:NBN: urn:nbn:hr:237:534423
• Datum objave publikacije: 2022
• Vrsta resursa: Tekst
• Prava pristupa: Otvoreni pristup
• Datum i vrijeme pohrane: 2024-09-04 20:54:44