prikaz prve stranice dokumenta Utilization of PlasticWaste in Road Paver Blocks as a Construction Material
  Preuzmi
PDF 2.29 MB
Znanstveni rad - Izvorni znanstveni rad
Utilization of PlasticWaste in Road Paver Blocks as a Construction Material
CivilEng, 4 (2023), 4; 1071-1082. https://doi.org/10.3390/civileng4040058
Agrawal, Rajat; Singh, Suraj Kumar; Singh, Saurabh; Prajapat, Deepak Kumar; Sudhanshu, Sharma; Sujeet, Kumar; Đurin, Bojan; Šrajbek, Marko; Gilja, Gordon

Citirajte ovaj rad

Agrawal, R., Singh, S. K., Singh, S., Prajapat, D. K., Sudhanshu, S., Sujeet, K. ... Gilja, G. (2023). Utilization of PlasticWaste in Road Paver Blocks as a Construction Material. CivilEng, 4. (4), 1071-1082. doi: 10.3390/civileng4040058

Agrawal, Rajat, et al. "Utilization of PlasticWaste in Road Paver Blocks as a Construction Material." CivilEng, vol. 4, br. 4, 2023, str. 1071-1082. https://doi.org/10.3390/civileng4040058

Agrawal, Rajat, Suraj Kumar Singh, Saurabh Singh, Deepak Kumar Prajapat, Sharma Sudhanshu, Kumar Sujeet, Bojan Đurin, Marko Šrajbek i Gordon Gilja. "Utilization of PlasticWaste in Road Paver Blocks as a Construction Material." CivilEng 4, br. 4 (2023): 1071-1082. https://doi.org/10.3390/civileng4040058

Agrawal, R., et al. (2023) 'Utilization of PlasticWaste in Road Paver Blocks as a Construction Material', CivilEng, 4(4), str. 1071-1082. doi: 10.3390/civileng4040058

Agrawal R, Singh SK, Singh S, Prajapat DK, Sudhanshu S, Sujeet K, i sur.. Utilization of PlasticWaste in Road Paver Blocks as a Construction Material. CivilEng [Internet]. 2023. [pristupljeno 12.11.2024.];4(4):1071-1082. doi: 10.3390/civileng4040058

R. Agrawal, et al., "Utilization of PlasticWaste in Road Paver Blocks as a Construction Material", CivilEng, vol. 4, br. 4, str. 1071-1082, 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:237:153811. [Citirano: 12.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:237:153811
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Utilization of PlasticWaste in Road Paver Blocks as a Construction Material
AutorRajat Agrawal
AutorSuraj Kumar Singh
AutorSaurabh Singh
AutorDeepak Kumar Prajapat
AutorSharma Sudhanshu
AutorKumar Sujeet
AutorBojan Đurin
AutorMarko Šrajbek
AutorGordon Gilja
Autorova ustanovaSveučilište u Zagrebu
Građevinski fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Građevinarstvo
Sažetak (engleski)
India is confronted with the substantial issue of plastic debris due to the absence of an efficient waste management infrastructure. Recycled plastic has the potential to enhance various construction materials, such as roofing tiles, paving blocks, and insulation. The aforementioned materials possess notable attributes such as high strength, low weight, and exceptional resistance to extreme temperatures and humidity. The objective of this study is to ascertain feasible alternatives for manufacturing road paver blocks utilizing plastic waste (Polyethene terephthalate (PET)), and M-sand (stone dust). Three variations of a discarded plastic cube measuring 150 mm × 150 mm × 150 mm were prepared for the experiment. The experimental findings indicated that a ratio of 1:4 was determined to be the most effective in achieving the desired level of compressive strength. I-section road and brick paver blocks were produced as an alternative to the traditional concrete ones. Compressive strength tests were performed on I-sections and brick paver blocks, revealing that the 1:4 mix ratio exhibited the highest average compressive strength for both materials. The findings indicated that including plastic waste positively impacted the compressive strength of the I-sections and brick paver blocks. Additionally, the quality grading of these materials was evaluated using an ultrasonic pulse velocity test. The ultrasonic pulse velocity test results demonstrated a high-quality grading for the I-sections and brick paver blocks. Scanning electron microscopy (SEM) tests assessed the microstructural behavior and performance. The results of this study demonstrate that incorporating plastic waste in combination with M-sand can effectively improve the mechanical characteristics of composite materials, rendering them viable for use in construction-related purposes.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaCivilEng
Brojčani podacivol. 4, br. 4, str. 1071-1082
e-ISSN2673-4109
DOIhttps://doi.org/10.3390/civileng4040058
URN:NBNurn:nbn:hr:237:153811
Datum objave publikacije2023
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-09-05 07:36:03